Figure 121. Ap Mode Configuration - Samsung WEC8500 Operation Manual

WEC8500/configure/ap ap_1/profile#
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points>  AP selection  <General> menu in the sub-menus.
After selecting the AP MODE NAME item, click the <Apply> button to apply the
configuration.
Figure 121. AP Mode Configuration
AP CLI Access Account
The APC operator can add or remove account information relating to the AP CLI. When
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Configure the AP mode.
o ap-mode [MODE]
Parameter Description
MODE AP
(generalAp/rootAp/repeaterAp/snifferAp/relayAP)
• generalAp: Typical operation mode. Default value.
• rootAp: AP mode where a repeater AP can be connected.
• repeasterAp: AP mode that is connected to a wireless area and
the APC through the root AP.
• snifferAp: AP mode where the packets operating in a wireless
environment can be captured.
• relayAp: An AP mode which connects a root AP and a repeater
AP wirelessly
To check the information of a configured AP, use the 'show ap detail
[AP_NAME]' command.
operation mode
181