Wi-Fi Qos Configuration - Samsung WEC8500 Operation Manual

Wi-Fi QoS Configuration

The APC provides various QoS in the wire/wireless section for every packet type (voice,
video, best-effort, or background). The QoS can be configured for each wireless section
(2.4 GHz, 5 GHz).
QoS Configuration of Wireless Terminal
The system provides probable QoS by changing the Enhanced Distributed Channel
Access (EDCA) parameter in a wireless section.
Configuration using CLI
To configure an EDCA profile in the upward wireless section of a wireless terminal,
execute the command as follows:
1
APC# configure terminal
APC/configure# [80211a/80211bg]
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <QoS> menu in the sub-menus.
In the Qos menu, there are Wired and Wireless tab. To change the Station EDCA
parameter, select the Wired tab. If you want to change the AP EDCA parameter to
configure the QoS of an AP wireless section, select the Wireless tab.
[Wired tab]
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure  radio mode to configure of CLI.
Apply the EDCA profile.
o edca-parameters [PROFILE] station
Parameter
PROFILE
To check the application status of a configured EDCA profile, use the
'show 80211a [80211bg] qos edca-parameters wmm_default_sta'
command.
Description
Configures each
(wmm_default_sta/wmm_default_ap/edca_user1/edca_user2).
EDCA profile
267