Samsung WEC8500 Operation Manual page 89

WEC8500/configure/router/ospf 2# overflow database 100 hard ?
<cr>
WEC8500/configure/router/ospf 2# overflow database 100 hard
WEC8500/configure/router/ospf 2# overflow ?
database
WEC8500/configure/router/ospf 2# overflow database ?
external
0 - 4294967294
WEC8500/configure/router/ospf 2# overflow database 100 ?
hard
soft
<cr>
WEC8500/configure/router/ospf 2# overflow database 100 soft ?
<cr>
WEC8500/configure/router/ospf 2# overflow database 100 soft
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <General> menu in the sub-menus.
Click a PROCESS ID that user wants to configure. The OSPF configuration window is
shown below.
Use the value configured in 'Configuration using CLI' as a user-defined value in the below
screen.
Network Configuration
Configuration using CLI
Go to configure  ospf configuration mode of CLI.
WEC8500/configure/router/ospf 2# ?
area
auto-cost
capability
compatible
default-information
default-metric
distance
distribute-list
exit
host
max-concurrent-dd
maximum-area
neighbor
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Enter the maximum number of LSAs and soft limit value.
Database
External link states
Maximum number of LSAs
Hard limit; Instance will be shutdown if exceed
Soft limit; Warning will be given if exceed
OSPF area parameters
Calculate OSPF interface cost according to bandwidth
Enable specific OSPF feature
OSPF compatibility list
Control distribution of default information
Set metric of redistributed routes
Define an administrative distance
Filter networks in routing updates
Exit from router mode
OSPF stub host entry
Maximum number allowed to process DD concurrently
Maximum number of ospf area
Specify a neighbor router
70