Figure 6. Optic Port Configuration; Wec8500/Wec8050 (Apc) Operation Manual V10.1 - Samsung WEC8500 Operation Manual

•
•
The 1000 BASE-T standard does not support the forced mode.
The auto-negotiation function must be always used for 1000 BASE-T port or
trunk connection.
Optic Port
It provides two 10 GbE Optic ports and eight 1 GbE Optic ports and the operational status
of each port is displayed in LED.
Figure 6. Optic Port Configuration
1G port
LINK/ACT LED
Configuration item
10 GE ports
1 GE port
USB Port (Host 2.0)
The WEC8500 provides a USB host port that supports the upgrade of WEC8500
operation software.
A typical USB memory stick is supported.

WEC8500/WEC8050 (APC) Operation Manual v10.1

©Samsung Electronics America
Separate the electrical wiring of a switch or related devices and the
electromagnetic area of network data line
Cable or connector and safe connection without damaged cable sheath
Port/LED
LINK/ACT 1, LINK/ACT 2
10G 1, 10G 2
LINK/ACT 1~LINK/ACT 8
1G 1~1G 8
1G port
Connector
Description
LINK/ACT status of each port
• Turned on for link connection
• Blinking for data exchange
10 GbE Optic module connector
LINK/ACT status of each port
• Turned on for link connection
• Blinking for data exchange
1 GbE Optic module connector
10G port 10G port
LINK/ACT LED Connector
7