Samsung WEC8500 Operation Manual page 168

Advanced Configuration
In order to provide the same services to the APs allocated to each group, the APC allows
configuration of advanced settings for each AP group.
Configuring AP Group Profile with CLI
1
WEC8500# configure terminal
WEC8500/configure#
2
3
4
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Create an AP group or enter the AP group configuration mode.
o ap-group [AP_GROUP_NAME]
Enter the profile configuration mode for the AP group.
o profile
Configure the following AP group profiles:
o overwrite-apc-ap-timer
o no overwrite-apc-ap-timer
o echo-interval
o discovery-interval
o report-interval
o statistics-timer
o retransmit-interval
o echo-retransmit-interval
o max-echo-retransmit
o overwrite-telnet-ssh
o no overwrite-telnet-ssh
o telnet-enable
o no telnet-enable
o ssh-enable
o no ssh-enable
o overwrite-console
o no overwrite-console
o console-enable
o no console-enable
o overwrite-dtls
o no overwrite-dtls
o dtls-policy
o overwrite-led-control
o no overwrite-led-control
149