Limiting The Number Of Connected Users - Samsung WEC8500 Operation Manual

Limiting the Number of Connected Users

The W-EP wireless LAN system limits the number of wireless terminals connected to each
AP.
The limitation is per radio (2.4/5 GHz bandwidth) or WLAN for each AP.
Limiting Connections per Radio
Configuration using CLI
1
APC# configure terminal
APC/configure#
2
3
Configuration using Web UI
[Configures per Radio]
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Radio>  <802.11a/n> or <802.11b/g/n>  <General> menu in the sub-menus.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Configure connection limitation.
o [RADIO]
max-associated-stations
Configures connection limitation per wireless bandwidth. When you
enter the 'global' parameter at the end, connection limitation is
applied to all the APs.
o [RADIO]
max-associated-stations
[AP_ID]: Configures connection limitation to a specific AP.
o [RADIO] max-associated-stations [MAX_STATION] [group] [AP
group ID]: Configures connection limitation to a specific AP group.
Parameter
RADIO
MAX-STATION
TARGET
AP_ID
AP group ID
To check the configuration information, use the 'show [80211a |
80211bg] radio-config [ap <ID> | group <ID> | global]' command.
[MAX_STATION]
[MAX_STATION]
Description
Wireless area to configure
[80211bg/80211a]
• 80211bg: 2.4 GHz area
• 80211a: 5 GHz area
Maximum number of wireless terminals that can be
connected (default: 127)
Configuration range
• AP: Index of an AP to configure
• Global: All APs connected to an APC
AP ID (range: 1-3000)
AP group ID (range: 1-3000)
global:
[TARGET]
315