WEC8500/configure# ap ap_1
WEC8500/configure/ap ap_1# ip-sec
WEC8500/configure/ap ap_1/ip-sec#
2
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP selection <General> menu in the sub-menus.
The setting options in the General tab are as follows:
Click the <Apply> button to apply the settings.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Configure ip-sec for the AP using the commands below:
o enable
o primary-ip
o right-subnet
o right-subnet-mask
o auth-mode
o ike-version
o ike-lifetime
o ipsec-lifetime
Parameter
ENABLE
PRIMARY-IP
RIGHT-SUBNET
RIGHT-SUBNET-MASK
AUTH-MODE
IKE-VERSION
IKE-LIFETIME
IPSEC-LIFETIME
Description
Enables/disables the IPSec function.
Configures the address of the primary security gateway.
Configures the address of the traffic selector for IPSec.
Configures subnet mask of the traffic selector for IPSec.
Configures the authentication mode used in IPSec.
PSK/PKI
Configures the IKE version.
1/2
Configures the IKE SA validity. (Unit: hours)
Configures the IPSec SA validity. (Unit: minutes)
177