Samsung WEC8500 Operation Manual page 288

APC# configure terminal
APC/configure# [80211a/80211bg] qos
APC/configure/80211a/qos#
2
3
4
5
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Configure a QoS policy to a wire section packet.
o 802.1P Policy: enable policy [802_1P]
o DSCP Policy: enable policy [DSCP_OUTER] [DSCP_INNER]
Parameter
enable
802_1P
• user_priority: Marks the 802.1p or User Priority value of an
• default: Marks pre-configured basic value to the 802.1p field.
DSCP_OUTER
• inner_packet: Marks the DSCP value of an incoming packet
• default: Marks pre-configured basic value to the Outer DSCP
DSCP_INNER
• no_mark: Marks no value into the Inner DSCP field.
• default: Marks pre-configured basic value to the Inner DSCP
Configure a default 802.1p value per packet.
o dot1p-tag [PACKET_TYPE] [802.1P_TAG]
Parameter
PACKET_TYPE
802.1P_TAG
Configure a default DSCP value per packet.
o dscp-tag [PACKET_TYPE] [DSCP TAG]
Parameter
PACKET_TYPE
DSCP_TAG
Configure a protocol to distinguish packet types.
o protocol [PROTOCOL]
Parameter
PROTOCOL
• none: Determine the type of every incoming packet with best
• dot1p: Judge the packet type by checking the 802.1p field of
• dscp: Judge the packet type by checking the DSCP field of an
Description
Enables 802.1p or DSCP marking.
802.1p configuration (user_priority/default)
incoming packet into the 802.1p field.
DSCP Outer configuration (inner_packet/default)
into the Outer DSCP field.
field.
DSCP Inner configuration (no_mark/default)
field.
Description
Packet type configuration (voice/video/best_effort/background)
Default 802.1p value
Description
Packet type configuration (voice/video/best_effort/background)
Default DSCP value
Description
Protocol configuration (none/dot1p/dscp)
effort.
an incoming packet.
269