Figure 119.
AP Profile Setting (1)
•
•
•
•
•
•
•
•
•
•
•
•
•
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP <Advanced> menu in the sub-menus.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
AP NAME: AP name
AP GROUP NAME: Indicates name of the AP GROUP to which the AP
belongs.
REMOTE AP GROUP NAME: Indicates name of the REMOTE AP
GROUP to which the AP belongs.
AP MODE: AP operational mode (General AP/Root AP/Repeater
AP/Sniffer AP)
MAC ADDRESS: Cannot be changed to the MAC address of an AP.
MAP LOCATION
LOCATION: Information of location where an AP is installed
IP ADDRESS: IP address of AP
IP ADDRESS POLICY: IP address mode
DISCOVERY TYPE: AP discovery type
ADMIN STATUS: AP administrative status
OPER STATUS: Current AP operational status
PRIMARY CONTROLLER NAME, SECONDARY CONTROLLER
NAME, TERTIARY CONTROLLER NAME: Redundancy mode
For WEC8050, the TERTIARY CONTROLLER NAME is not supported.
178