Figure 98. Ap Groups Configuration Window; Figure 99. Ap Group Addition Window - Samsung WEC8500 Operation Manual

4
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. It provides the group configuration of the AP.
Click the <Add> or <Delete> button to add or delete a group.
Figure 98. AP Groups Configuration Window
Figure 99. AP Group Addition Window
General AP Group Settings
To aid management of APs in groups, the APC allows configuration of settings which can
be applied commonly to each group. The following functions are provided:
The APC provides the overwrite option for each AP group setting. If the Overwrite option
is enabled for each setting, the respective setting is applied to all APs within the group.
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
other AP groups other than the default group, the deleted AP is included
into the default AP group.
o add-ap [AP_NAME]
o no add-ap [AP_NAME]
Use the 'show ap-group summary' command to check the AP group
information.
Parameter Description
Description This configures the description of the AP group.
AP Mode This configures the operation mode of the AP. The operator can
select General AP, Root AP, or Repeater AP.
Location This configures the installation location information of the AP.
IP Mode This configures the IP configuration mode of the AP. The operator
can select DHCP or AP Priority.
AP Status This configures the up/down status of the AP.
Redundancy If the APCs are configured for redundancy, this configures the
discovery type and Primary/Secondary/Tertiary Controller settings of
the AP.
139