Telnet/Ssh - Samsung WEC8500 Operation Manual

Telnet/SSH

The telnet or Secure Shell (SSH) is an Internet protocol that helps login to another
computer in a network or connects to a virtual remote system. Using telnet or SSH, you
can connect to another computer while staying at a current computer.
Because the SSH can access a remote system and transmit an encrypted message by
using public key-based encryption method, it provides better security.
Configuration using CLI
[Telnet Server Configuration]
The Telnet server configuration is as follows:
1
WEC8500# configure terminal
2
3
[SSH Server Configuration]
The SSH server configuration is as follows:
1
WEC8500# configure terminal
2
3
[Checking Server Configuration Status]
To check the status of telnet or ssh server, enter the following command. You can retrieve
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Enable or disable the telnet service. If you configure the telnet service,
you can use the APC as a telnet server.
o telnet-server enable: Enable
o no telnet-server enable: Disable
If you configure the telnet service, specify the port number of telnet
server.
o telnet-server port [PORT_NUMBER]
Parameter
PORT_NUMBER
Go to the configure mode of the CLI.
Enable or disable the SSH server.
o ssh-server enable: Enable
o no ssh-server enable: Disable
Specify the port number of SSH server.
o ssh-server port [PORT_NUMBER]
Parameter
PORT_NUMBER
Description
Port number to configure (range: 1-65535)
Description
Port number to configure (range: 1-65535)
433