Os-Aware - Samsung WEC8500 Operation Manual

APC# configure terminal
APC/configure# interface ge2
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <Access Control Lists>  <Access Group (Interface)> menu in the sub-
menus.
Perform configuration by referring to 'ACL Rule Configuration'.

OS-AWARE

OS-AWARE is a function to use the option value of the DHCP Discover/Request
transmitted from a station to check the type of the operating system used by the station.
The procedures to set OS-AWARE and apply the OS-AWARE settings to ACL are
described below:
OS-AWARE Configuration
Configuration using CLI
1
APC# configure terminal
APC/configure# os-aware
APC/configure/os-aware # ?
delete
exit
os-aware
update
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Configure ACL to the interface. The 'no' parameter is used to delete ACL.
o ip access-group [MODE] [DIRECTION] [ACL_NAME]
o no ip access-group [fw/fqm] [DIRECTION] [ACL_NAME]
Parameter
MODE
DIRECTION
ACL_NAME
To check the configuration information, use the 'show running-config
network' command.
Go to configure  os-aware mode of CLI.
Os-aware delete operation
Exit from os-aware mode
Os-aware add operation
Os-aware update
Set the OS-AWARE. Use the 'delete' parameter to delete the OS-
AWARE.
o os-aware [OS_AWARE NAME] dhcp-option [OPTION_NUM] dhcp-
option
Description
Configuration mode (fw/fqm)
For ACL rule configuration, select 'fqm' (The 'fw' is used
for firewall configuration.)
Application direction configuration (in/out)
ACL name to configure
104