Admin ACL Configuring
Configuration using CLI
1
APC# configure terminal
APC/configure# fqm-mode
2
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security> <Access Control Lists> <Access Group (System)> menu in the sub-
menus.
The initial window of Access Group is shown below. After selecting a configuration, click
the <Apply> button to configure Admin ACL.
Figure 64.
Admin ACL Configuration Window
Class-map Configuration
1
APC# configure terminal
APC/configure# fqm-mode
2
3
4
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the fqm mode to configure the configure ACL rule of CLI.
Configure Admin ACL by entering the 'ip access-group wireless'
command.
o ip access-group system [ACL_NAME]
Parameter
ACL_NAME
To check the configuration information, use the 'show running-config
network' command.
Go to the fqm mode to configure the configure ACL rule of CLI.
Go to Class-map mode.
o class-map c1
Select match-all or match-any.
o match-type [MODE]
Parameter
MODE
Perform a detailed configuration according to match criteria.
Description
ACL name to configure
Description
Match mode configuration (match-all/match-any)
99