System Management - Samsung WEC8500 Operation Manual

System Management

Retrieving System Information
Retrieving with CLI
By using the 'show system info' command, you can check the system configuration
information of the APC system such as version information, memory information, disk
information, temperature sensor, fan status and so on.
The execution results of the command in WEC8500 are as follows:
WEC8500/configure# show system info
-----------------------------------------------------
Item
-----------------------------------------------------
System Info :
model type
system description
board version
cpld version
system mac address
system total memory
system total disk
Temperature Sensor Status
cpu upside sensor
cpu downside sensor
board sensor
Fan Status :
fan[0]
fan[1]
fan[2]
fan[3]
Power Supply Status :
Power Supply[0]
Status
Power Supply[1]
Status
-----------------------------------------------------
The execution results of the command in WEC8050 are as follows:
WEC8050# show system info
-----------------------------------------------------
Item
-----------------------------------------------------
System Info :
model type
system description
board version
cpld version
serial number
system mac address
system total memory
system total disk
Temperature Sensor Status :
CPU sensor1
CPU sensor2
Fan Status :
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
System Info
WEC8500
Samsung AP Controller
0.1
0.5
00:7e:37:00:1e:70
16046580 KBytes
13520032 KBytes
:
OK
OK
OK
OK
OK
OK
OK
Equipped
OK
Not Equipped
-
System Info
WEC8050
Samsung AP Controller
0.0
0.1
00:7e:37:00:21:d4
4855272 KBytes
12191593 KBytes
OK
OK
440