Figure 155. Wpa/Wpa2 802.1X Configuration (1) - Samsung WEC8500 Operation Manual

Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus.
1
Figure 155. WPA/WPA2 802.1x Configuration (1)
Item
PROFILE NAME
AUTHENTIC Enable/
ATION Disable
SERVER
RADIUS
SERVER 1
RADIUS
SERVER 2
RADIUS
SERVER 3
ACCOUNTIN Enable/
G SERVER Disable
RADIUS
SERVER 1
RADIUS
SERVER 2
RADIUS
SERVER 3
FALLBACK TEST INTERVAL
ACCOUNTING INTERVAL
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Select a WLAN ID to change in the WLANs screen and go to the
<Security>  <Radius> tab.
Description
A WLAN configuration name is displayed.
Whether the authentication function is enabled.
• Enable: The authentication function is enabled.
• Disable: The authentication function is disabled.
Authentication server that will be used as the first priority
(Can select one out of pre-configured RADIUS servers.)
Authentication server that will be used as the second priority
(Can select one out of pre-configured RADIUS servers.)
Authentication server that will be used as the third priority
(Can select one out of pre-configured RADIUS servers.)
Whether the accounting function is enabled.
• Enable: The accounting function is enabled.
• Disable: The accounting function is disabled.
Accounting server that will be used as the first priority
(Can select one out of pre-configured RADIUS servers.)
Accounting server that will be used as the second priority
(Can select one out of pre-configured RADIUS servers.)
Accounting server that will be used as the third priority
(Can select one out of pre-configured RADIUS servers.)
RADIUS server Fallback attempt interval (unit: s, range: 0-500, default: 0),
When set to 0, the fallback function is disabled.
Accounting information transmission interval (unit: s, range: 0-10000,
default: 600), When set to 0, the periodic accounting information
223