Samsung WEC8500 Operation Manual page 104

Stub or NSSA is configured to the ID.
Summary Configuration
Configuration using CLI
WEC8500/configure/router/ospf 2# summary-address ?
A.B.C.D/M
WEC8500/configure/router/ospf 2# summary-address 1.1.1.1/16 ?
not-advertise
tag
<cr>
WEC8500/configure/router/ospf 2# summary-address 1.1.1.1/16
WEC8500/configure/router/ospf 2#
Operator can perform a detailed configuration only when you enter a summary-address.
The detail configuration includes advertise or TAG configuration.
1
2
WEC8500/configure/router/ospf 2# summary-address 11.1.1.1/16
WEC8500/configure/router/ospf 2# summary-address 11.1.1.1/16 tag ?
0 - 4294967295
WEC8500/configure/router/ospf 2# summary-address 11.1.1.1/16 tag 3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <Summary> menu in the sub-menus.
The configuration page is as follows:
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
IP summary prefix
Suppress routes that match the prefix
Set tag
Parameter
summary-address
Advertise Configuration
The default is set to Enable. Therefore, if no-advertise is selected in the
CLI, the configuration is changed to Disable.
Tag
A tag is a user-defined 32-bit tag value between 0 and 4294967295. A
tag also has a default value and it is 0.
32-bit tag value
Description
A.B.C.D/M
85