[TX Power Setting]
•
•
To check the configured channel and TX power information, go to <Monitor>
<Access Points> <Radio> <802.11a/n/ac>.
[General]
•
•
•
•
802.11b/g/n Configuration
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <AP Groups>
in the submenu, and then select an AP group to configure. Settings can be configured
under the '802.11b/g/n' tab of the AP group.
Figure 104.
802.11b/g/n Window for AP Group
The configuration items are as follows:
[Service Configuration of AP Group]
•
[OPERATIONAL TYPE]
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
<Monitor> <Access Points> <Radio> <802.11a/n/ac> menu is
selected, the channel value is shown as * (optional).
TX CURRENT POWER: TX power (range: 3-30)
TX POWER FIX: The configured TX power is configured as fixed and it
is not affected by automatic adjustment functions such as RRM. When
the <Monitor> <Access Points> <Radio> <802.11a/n/ac> menu
is selected, the TxPower value is shown as * (optional).
BANDWIDTH: select bandwidth (range: 20, 40, 80) for 802.11a/n/ac.
Max. Allowed Stations on an AP: define max allowed stations for Radio.
CONTROLLED VOICE OPTIMIZATION: set voice optimization.
Multi-antenna Mode: select Dynamic/Static.
SERVICE: Enable or disable the radio service.
Enable or disable of 11n service.
146