Figure 252.
List Window for Blocking Station
Configuring Automatic Blocking
To configure automatic blocking, execute the command as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wids# containment
WEC8500/configure/wids/containment#
2
managed-station
with-managed-station
managed-ssid
3
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
containment.
Go to configure wids containment configuration mode of CLI.
Configure automatic blocking.
o auto[OPTION]
The description of OPTION parameter is as follows:
Parameter
adhoc-connection
neighbor-ap-associated-with-
unmanaged-ap-associated-
unmanaged-ap-uses-
unmanaged-ap
To check the configuration of automatic blocking, it is possible to use the
following command:
Description
If adhoc is detected, it is automatically blocked.
If the managed station and the neighbor AP are
connected, it is automatically blocked.
If the managed station and the unmanaged AP are
connected, it is automatically blocked.
If the honeypot is detected, it is automatically blocked.
If the unmanaged AP is detected, it is automatically
blocked.
376