AP Registration (Auto Discovery) Configuration
The APC provides the AP auto-discovery function that automatically registers APs in the
same network without having to configure any settings in advance. To configure the
function, execute the following commands:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# apc
WEC8500/configure/apc # capwap
WEC8500/configure/apc/capwap #
2
3
4
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <General> menu from the sub-menus.
After entering a configuration in the AP Registration of the window, click the <Apply>
button.
Figure 94.
AP Registration Method Setup Window
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to configure apc capwap of CLI.
Configure the automatic registration function.
o auto-discovery
Configure an AP group that will be working after AP automatic
registration.
o auto-discovery-ap-group [AP_GROUP_ID]
Parameter
AP_GROUP_ID
To check the configured information, use the 'show apc capwap
summary' command.
Description
ap-group that will be working after AP automatic registration
131