4) Step4 (when selecting Tunnel Forwarding):
5) Step5 (when selecting Tunnel Forwarding):
6) Result Display
NAT Setup Wizard
In the menu bar of <WEC Main window>, select <Configuration> and then select
<Wizard> <NAT> menu in the sub menu.
For step 1, start WLAN Setup.
Description on the Screen
Figure 36.
NAT Setup Wizard Step. 1
Figure 37.
NAT Setup Wizard Step. 2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
o Select WLANs to be included in the Remote AP Group created in
step 1.
o Set the ACL Rules created in step 2 to the Remote AP Group created
in step 1.
o After finishing step.3 or step.5, a result is displayed
①
②
②
38