Figure 62. Acl Interface Configuration Window (1); Figure 63. Acl Interface Configuration Window (2) - Samsung WEC8500 Operation Manual

Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <Access Control Lists>  <Access Group (Interface)> menu in the sub-
menus.
The initial window of WLAN ACL configuration is shown below. When you click the <Add>
or <Delete> button, you can add or delete ACL rule.
Figure 62. ACL Interface Configuration Window (1)
To perform a detailed configuration, select an interface in the list.
Figure 63. ACL Interface Configuration Window (2)
The types of interfaces you can configure are retrieved. In the INTERFACE, select an
interface. For DIRECTION, select Ingress or Egress. For ACL NAME, select an item
(name) that is configured in the ACL List configuration.
To apply the changed configuration, click the <Apply> button.
WLAN ACL Configuration
1
APC# configure terminal
APC/configure# fqm-mode
2
3
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the fqm mode to configure the configure  ACL rule of CLI.
Configure WLAN ACL by entering the 'ip access-group wireless'
command.
o ip access-group wireless [ACL_NAME]
Parameter
ACL_NAME
To check the configuration information, use the 'show running-config
network' command.
Description
ACL name to configure
98