Outdoor Ap Configuration; Figure 128. Ap Tech Support Information Receiving Window - Samsung WEC8500 Operation Manual

WEC8500/configure/ap ap_1/tech-support# get-log-file
5
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Administrator> and then select the
<Tech Support>  <AP Crash> menu in the sub-menus.
By clicking the profile name of an AP, operator can download the Tech Support file.
Figure 128. AP Tech Support Information Receiving Window

Outdoor AP Configuration

The APC system provides outdoor AP connection diagnostic functions for outdoor APs.
The function of the AP connection diagnostics checks ping status of outdoor APs and
displays the results on the operator's monitor.
This function is applied connected with 3rd party outdoor AP. Samsung outdoor AP is
managed identically with general AP.
Procedure of using the outdoor AP connection diagnostics function is as follows:
1
2
3
Concerning outdoor AP count:
1
2
3
4
Outdoor AP Addition/Removal
The APC system allows creation/deletion of outdoor AP information using the WEC or
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Use 'show ap tech-support' command to check the Tech Support file
information of APs. Operator can use FTP or sFTP to download Tech
Support files.
The operator creates/deletes outdoor APWEC using CLI.
The APC system periodically pings the outdoor AP to check the network
connection of the AP and stores the results.
The operator uses the WEC, WEM or CLI to determine network
connection status of the outdoor AP.
Outdoor APs are not included in the AP count of the APC license.
Outdoor APs are not included in the ordinary AP count.
The maximum up-ported outdoor AP count is 300 for the WEC8500
model and 75 for the WEC8050 model.
The APC system can retrieve the total/up/down outdoor AP count using
the WEC or CLI.
188