Chapter 2 Basic System Configuration; Basic System Configuration; Cli Connection; Managing Operator Account - Samsung WEC8500 Operation Manual

Chapter 2
In this chapter, the basic system configuration using web and Command Line Interface
(CLI) is introduced and how to use CLI and Web UI is described.

Basic System Configuration

CLI Connection

Connecting to APC using CLI is as follows:
When the booting of APC is completed, log into the system as follows:
USERNAME : samsung
PASSWORD : samsung
THIS IS YOUR FIRST LOGIN AFTER USER ACCOUNT HAS BEEN CREATED.
YOU MUST CHANGE YOUR PASSWORD.
ENTER LOGIN PASSWORD
ENTER NEW PASSWORD
CONFIRM NEW PASSWORD
PASSWORD SUCCESSFULLY CHANGED
WEC8500 #

Managing Operator Account

An operator who has an administrator privilege (level 1) can create or delete a new
operator account. When creating an account, specify the account's privilege level (level 1-
4).
To set up operator account related functions, go to configure mode by executing the
following command:
WEC8500# configure terminal
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Basic System
Configuration
•
Direct connection to the system console port
•
Telnet or SSH connection through an Ethernet port
For the first connection, log in using ID: 'samsung' and Password:
1
'samsung'.
: samsung
: ********
: ********
2
After the first login, you must change the password. Use the changed
password for the next login. New password must be more than 8
characters and contain at least one alphabet/numeric/special letters.
The default ID of APC is set to 'samsung' that has an administrator privilege.
19