Wpa/Wpa2 Psk Configuration - Samsung WEC8500 Operation Manual

Item
STATIC WEP
INDEX
802.1X
(DYNAMIC WEP)
After selecting the L2 Security Type as None, click the <Apply> button.

WPA/WPA2 PSK Configuration

The WPA/WPA2 PSK, one of wireless LAN authentication types, can be used in a small
size network where an authentication server is not installed.
The procedure of WPA/ WPA2 PSK configuration is as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wlan 1
2
WEC8500/configure/wlan 1# security
WEC8500/configure/wlan 1/security# setDefault
3
WEC8500/configure/wlan 1/security# [WPA_TYPE]
4
WEC8500/configure/wlan 1/security# psk [KEY_TYPE] [KEY_STRING]
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Description
• HEX: Hexadecimal value
WEP KEY SIZE Key length
• 40: 40-bit (5-byte)
• 104: 104-bit (13-byte)
WEP KEY Key index (1-4)
WEP KEY key value
WEP KEY SIZE Key length
• 40: 40-bit (5-byte)
• -04: 104-bit (13-byte)
Go to configure  wlan configuration mode of CLI.
Go to security configuration mode and initialize the configuration.
Configure the WPA type.
Parameter
WPA_TYPE
Configure the PSK key.
Description
WPA type (wpa/wpa2): WPA Version 2 must be enabled at all
times.
• wpa: WPA Version 1
• wpa2: WPA Version 2
221