Relocating The Machine; Installing The Copy Tray; Checking The Components; Turning Off The Machine - Canon iR C2880 Series Service Manual

- Check to see that the machine does not produce any abnormal noise.
- Check to see that the images are produced correctly at different
magnifications.
- Check to see that the machine produces as many copies as specified
normally.
2) Make settings (Additional Function ; e.g., date, time) to suit the needs of
the user.
3) Start service mode.
4) Make the user-related settings to suit the needs of the user (COPIER > OP-
TION > USER).
5) Print out test prints in service mode (COPIER > FUNCTION > MISC-P
> P-PRINT).
6) Put away the printed test print [1] in the service book case.
F-2-58
7) Press the Reset key twice to end service mode.
8) Clean up the area around the machine, and fill out the service book.

2.6 Relocating the Machine

2.6.1 Relocating the Machine
iR C3380i / iR C3380 / iR C2880i / iR C2880
If you need to relocate the machine after installation by truck or other means
of transportation, be sure to perform the following work in advance:
If you want to move the machine intact with its cassette pedestal, be sure not
to use the machine's grips; otherwise, the machine will come off the cassette
pedestal as when it is moved over a step. Be sure to lift the cassette pedestal.
1) Fix the scanner in place using the scanner fixing screw [1] that has been
set aside from the time of installation.
F-2-59
2) Put paper on the copyboard glass.
3) Remove all toner cartridges and developing assembly so that the develop-
ing rotary will not rotate in response to vibration occurring in transit.

2.7 Installing the Copy Tray

2.7.1 Checking the Components

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
<Copy Tray-J1>
0013-8321
[1]
0013-9951
F-2-60
[1] Copy Tray

2.7.2 Turning Off the Machine

iR C3380i / iR C3380 / iR C2880i / iR C2880
See the host machine installation 'Points to Note When Turning Off the Main
Power'.

2.7.3 Installation Procedure

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1) Using a flat-blade screwdriver, free the 2 claws [2] of the delivery cover
[1] to remove.
F-2-61
2) Fitting the 2 protrusions [1] at the both edges of the tray to the holes, attach
the tray [2].
Chapter 2
[1]
1 pc.
0013-9956
0013-9957
[1]
[2]
2-17