Led Display - Avaya Nortel Communication Server 1000 Reference

Table 256: CP MG faceplate LED status
LED color
Green
Orange
Red
Flashing Red
Off

LED display

The four character LED display provides information on the CP MG card status during power-
on self test and during boot. The four character LED display provides super-loop and shelf
information when the Media Gateway registers with the Call Server. The four character LED
display also provides the IP link status between the MGS and the Call Server.
The diagnostic messages display on the CP MG faceplate, see
display on page 611
Table 257: CP MG LED display
Message
BOOT
POST
PASS
EXXX
LOAD
LLL:S
In a normal boot process the diagnostic messages display in the following order:
1. BOOT
2. POST
3. PASS
4. LOAD
Circuit Card Reference
Common Processor status
All applications running
Linux running, applications
booting
BIOS and Linux Base initializing Booting
Not used
No power
Description
This is the first message displayed when the system becomes
active.
Power on self test. This message is displayed when the MGS is
carrying out system tests during power up.
Power on self test pass.
Error code. XXX is a numeric value. An error code is displayed if a
serious system error is detected.
Application software is loading.
IPMG super loop and MGS shelf number. LLL is the superloop
number. S is the shelf number. For example, 032:0, 120:1
Gateway Controller status
Not used
Self test error
Self test passed
Running, or no power
Table 257: CP MG LED
LED display
July 2011 611