Avaya Nortel Communication Server 1000 Reference page 77

Danger:
To avoid personal injury and equipment damage, read all of the guidelines in
installation
procedure.
Installing a circuit card
1. Open the protective carton and remove the circuit card from the antistatic bag.
2. Inspect the card components, faceplate, locking devices, and connectors for
3. Refer to the work order to determine the module and slot location for the card.
4. If there is an enable/disable (Enb/Dis) switch on the faceplate, set it to Dis.
5. If there are option switches or jumpers on the card, set them according to the work
6. Squeeze the ends of the locking devices on the card and pull the tabs away from
Circuit Card Reference
on page 71 before you begin installation and follow all guidelines throughout the
Return the antistatic bag to the carton and store it for future use.
damage. If damaged, tag the card with a description of the problem and package it
for return to a repair center.
order (see Option settings
Caution:
System Failure
Incorrectly set switches on common equipment circuit cards may cause a system
failure.
the latch posts and faceplate (see
cage on page 77).
Figure 16: Installing the circuit card in the card cage
on page 87).
Figure 16: Installing the circuit card in the card
Installing a circuit card
Circuit and
July 2011 77