Faceplate - Avaya Nortel Communication Server 1000 Reference

Faceplate

The CP DC card is available in two sizes: NTDW53 single slot, and NTDW54 double slot. The
CP DC card faceplate provides a reset button, status LEDs, three USB 2.0 ports, one VGA
port, and two Gigabit Ethernet ports. The NTDW53 CP DC card faceplate is shown in
173: NTDW53 CP DC faceplate
Figure 173: NTDW53 CP DC faceplate
The VGA port provides monitor support. The three USB 2.0 ports provide USB keyboard, USB
mouse, and USB 2.0 storage device support. You can use the USB 2.0 ports for software
installations, upgrades, and patches.
The reset button provides a CP DC hardware reset. The reset button is recessed to prevent
accidental resets. You must use a small blunt object to access the reset button. During a reset
the status LED will flash red until the reset is complete. The CP DC card does not provide a
faceplate INI button. To re-initialize a CP DC card, use the Command Line Interface (CLI)
appstart cs restart command.
Status LED
The CP DC faceplate STS LED is a tri-color system status indicator. To determine the CP DC
system status, see
Table 260: CP DC faceplate status LED
LED color
Green
Flashing Green
Orange
Flashing Orange
Red
Flashing Red
Off
Circuit Card Reference
on page 619.
Table 260: CP DC faceplate status LED
Link is up
Link is down
Linux applications loading
Linux applications load successful
BIOS self test
Bootrom and Linux base loading
No power
on page 619.
CP DC system status
Faceplate
Figure
July 2011 619