Avaya Nortel Communication Server 1000 Reference page 345

Action:
Place the card in the manually disabled state with the
and follow the steps in
SYSTEM DISABLED—FATAL ERROR:
Cause:
The MSDL card encountered a fatal error and cannot recover. The exact reason for the
fatal error is shown in the MSDL300 error message output to the console of TTY when
the error occurred.
Action:
Check the MSDL300 message to find out the reason.
Alternatively, display the status of the MSDL, which also indicates the cause of the
problem, with the
cause of the fatal error.
Allow the system to attempt recovery. If this fails, either by reaching a threshold or
detecting self-test failure, place the MSDL in the manually disabled state with the
DIS MSDL x
cards
SYSTEM DISABLED—RECOVERY THRESHOLD:
Table 156:
Cause:
The system attempted autorecovery of the MSDL card more than five times within 30
minutes and each time the card was disabled again. The system attempts to enable
the card again at midnight unless you intervene.
Action:
Place the MSDL card in a manually disabled state with the
command and follow the steps in
page 340.
Circuit Card Reference
Previously operating MSDL cards
STAT MSDL x
command and follow the steps in
on page 340.
DIS MSDL x
command and check the information to find the
Previously operating MSDL
Previously operating MSDL cards
System disabled actions
command
on page 340.
DIS MSDL x
on
July 2011 345