Nt8D14 Universal Trunk Card - Avaya Nortel Communication Server 1000 Reference

Option settings
Note:
The device number for the MSDL card is configured in LD17 at the prompt DNUM. You
must also set the device number, using switches S9 and S10, on the MSDL card. S9
designates ones and S10 designates tens. To set the device number as 14, for example,
set S10 to 1 and S9 to 4.

NT8D14 Universal Trunk card

Table 29: NT8D14 vintage AA jumper strap settings
vintages BA/BB cable loop resistance and loss
Universal Trunk card.
Table 29: NT8D14 vintage AA jumper strap settings
Central Office (CO)
2-way tie trunk (loop dial repeat)
2-way tie trunk (outgoing/incoming dial)
Recorded announcement (RAN)
Paging trunk
Japan CO/DID operation
DID operation: loop length > = 2000 ¾
DID operation: loop length < 2000 ¾
Note:
off = no strap present.
Note:
Locations (J1, J2) apply to all eight units.
Table 30: NT8D14 vintages BA/BB jumper strap settings-factory standard
Trunk types
CO/FX/WATS
2-way tie (LDR)
2-way tie (OAID)
98 Circuit Card Reference
Modes
Loop length
Zero–1524 m (5000 ft)
Comments? infodev@avaya.com
on page 98 through
on page 100 list option settings for the NT8D14
Location Jumper strap
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
J1, J2
Jumper strap settings
J1.X J2.X
Off Off
Table 33: NT8D14
off
off
off
off
off
off
on
off
J3.X J4.X
1–2 1–2
July 2011