Avaya Nortel Communication Server 1000 Reference page 336

NT6D80 MSDL card
Figure 93: MSDL states
A newly configured MSDL automatically enters the manually disabled state. An operating
MSDL can be manually disabled by issuing the DIS MSDL x command in LD 37 (step 1 in
Figure 93: MSDL states
Entering the DIS MSDL x command in LD 37 moves the card to manually disabled status and
stops all system communication with the card (step 5 in
336).
Manually enabled
When the card is manually disabled, re-enable it with the ENL MSDL x command in LD 37
(step 2 in Figure 93: MSDL states
System disabled
When the system disables the MSDL card (step 4 in
continues to communicate and attempt maintenance procedures on the card. To stop all
system communication with the card, enter DIS MSDL x to disable it (step 5 in
MSDL states
attempting recovery during the midnight routines (step 3 in
page 336).
336 Circuit Card Reference
on page 336).
on page 336).
on page 336). Otherwise, the system periodically tries to enable the card,
Comments? infodev@avaya.com
Figure 93: MSDL states
Figure 93: MSDL states
Figure 93: MSDL states
on page
on page 336), it
Figure 93:
on
July 2011