NT6D80 MSDL card
Figure 91: MSDL switch setting example
Installing the MSDL card
Installing the MSDL card
To install an MSDL card follow these steps:
1. Set Device Number S10 and S9.
2. Hold the MSDL by its card-locking devices. Squeeze the tabs to unlatch the card
3. Insert the MSDL card into the selected card slot of the module following the card
4. Slide the MSDL into the module until it engages the backplane connector.
330
Circuit Card Reference
locking devices and lift the locking device out and away from the card. Be careful
not to touch connector pins, conductor traces, or integrated circuits. Static discharge
may damage integrated circuits.
guides in the module.
Comments? infodev@avaya.com
July 2011