Reset Switch; Status Led - Avaya Nortel Communication Server 1000 Reference
Circuit card reference
Hide thumbs
Also See for Nortel Communication Server 1000:
- Manual (570 pages) ,
- Configuration manual (350 pages) ,
- Hardware installation and maintenance (262 pages)
Table of Contents
Advertisement
Reset switch
The reset switch on the faceplate manually resets the Media Card.
Status LED
The NTVQ01xx Media Card faceplate red LED indicates the following:
• the enabled/disabled status of the card
• the self-testing result during power up or card insertion into an operational system
PC card slot
This slot accepts standard PC card flash cards, including ATA Flash cards (3 Mbit/s to 170
Mbit/s). Nortel supply PCM card adaptors which enable CompactFlash cards to be used in this
slot. This slot is used for NTVQ01xx Media Card software upgrades, backing up
announcements, and additional storage.
Ethernet activity LEDs
The NTVQ01xx Media Card faceplate contains Ethernet activity LEDs for each network.
Maintenance hex display
This is a four-digit LED-based hexadecimal display that provides the status of the NTVQ01xx
Media Card at all times. The hex display provides an indication of fault conditions and the
progress of PC card-based software upgrades or backups. It also indicates the progress of the
internal self-test in the form of T:xx.
Circuit Card Reference
Hardware architecture
July 2011
665
Advertisement
Table of Contents
