Avaya Nortel Communication Server 1000 Reference page 629

4. Place Dip Switch S5 in position 2 to select HD Master option.
5. Remove on-board compact flash retainer clip if populated.
Circuit Card Reference
Figure 181: Securing CP PM hard drive to circuit board
Figure 182: CP PM Signaling Server FMD dip switch
Important:
A Nortel CP PM circuit card has an on-board switch (S5) for designating the
internal hard drive (HD) or internal Compact Flash (CF) drive as the Fixed Media
Device (FMD) for the Signaling Server. You must configure the on-board FMD
switch (S5) to position 2 to designate the HD as the FMD for the Signaling
Server.
Media storage
July 2011 629