Avaya Nortel Communication Server 1000 Reference page 631

Figure 184: DDR memory module
Upgrading the CP PM memory
1. Locate an empty memory slot on the CP PM card, as shown in
2. Grip the memory module by its sides and insert it into the slot at an approximately
Circuit Card Reference
card with empty memory slot
Figure 185: CP PM card with empty memory slot
30 degree angle.
Align the notch in the memory module with the protruding pin in the slot, as shown
in Figure 186: Inserting a memory module in CP PM card
on page 631
Memory
Figure 185: CP PM
on page 632.
July 2011 631