Physical Specifications - Avaya Nortel Communication Server 1000 Reference

NT5K21 XMFC/MFE card
it is configured as an XMFE card. These requirements conform to French Socotel specifications
ST/PAA/CLC/CER/692.
Table 139: XMFE sender specifications
Forward frequencies in OG mode:
Forward frequencies in IC mode:
Frequency tolerance:
Power level at each frequency:
Level tolerance:
Harmonic Distortion and Intermodulation:
Time interval between start of 2 tones:
Time interval between stop of 2 tones:
Table 140: XMFE receiver specifications
Input sensitivity: accepted:
rejected:
rejected:
rejected:
Bandwidth: accepted:
Amplitude twist: accepted:
Operating time:
Release time:
Tone Interrupt causing no release:
Longest Input tone ignored:
Longest control tone ignored:
Noise rejection:

Physical specifications

Table 141: Physical specifications
NT5K21 XMFC/MFE circuit card.
Table 141: Physical specifications
Dimensions
300 Circuit Card Reference
700, 900, 1100, 1300, 1500 Hz
1900 Hz
+/- 0.25% from nominal
Selectable: 1 of 16 levels
+/- 1.0 dB
35 dB below level of 1 signaling frequency
125 usec.
125 usec.
-4 dBm to -35 dBm +/- 10 Hz of nominal
-42 dBm signals
-4 dBm outside 500-1900 Hz
-40 dBm single/multiple sine wave in 500-1900 Hz
fc +/- 20 Hz
difference of 9 dB between frequency pair
< 64 msec.
< 64 msec.
< 8 msec. Receiver on, tone missing
< 8 msec. Combination of valid frequencies
< 15 msec. Control Frequency only
S/N > 18 dB No degradation in-band white noise
on page 300 outlines the physical specifications of the
Height: 12.5 in. (320 mm)
Comments? infodev@avaya.com
July 2011