Avaya Nortel Communication Server 1000 Reference page 179

Notation Used:
CAPS - Required Letters
Each of these commands can be executed by typing the first letter of the command or by typing
the entire command. Command sets are entered by typing the first letter of the first command,
a space, and the first letter of the second command or by typing the entire command.
79: MMI commands and command sets
listed in alphabetical order. These commands are described by subject later in this section.
Table 79: MMI commands and command sets
Command
A D
A E
C A
C A L
C E
D A [P]
D C
D H [P]
D P
D S [P]
H or ?
L
Circuit Card Reference
[ ] - Optional
Alarm Disable Disables all alarms.
Alarm Enable Enables all alarms.
Clear Alarm Clears all alarms, terminates line processing, and resets the
T1 bit error rate and frame slip counters.
Clear Alarm Log Clears the alarm log.
Clear Error Clears the error counter for the T1.
Display Alarms [Pause] Displays the alarm log – a list of the most recent
100 alarms along with time and date stamps.
Display Configuration Displays the configuration settings for the cards
including:
• the serial number of the card
• MMI firmware version
• date and time
• alarm enable/disable setting
• self-clearing enable/disable setting
• settings entered in Set Configuration
• dip switch settings
Display History [Pause] Displays performance counters for the past 24
hours.
Display Performance Displays performance counters for the current
hour.
Display Status [Pause] Displays carrier status, including whether the card
is in the alarm state, and what alarm level is currently active.
Help Displays the help screen.
Login Logs into the MMI terminal when the system has one Lineside T1
card.
Man-Machine T1 maintenance interface software
| - Either/Or
on page 179 shows all the possible command sets,
Description
Table
July 2011 179