Chapter 9: NT4N39AA CP Pentium IV Card
Contents
This section contains information on the following topics:
Introduction
Physical description
Functional description
Front panel connector pin assignments
Introduction
The NT4N39AA Call Processor Pentium IV (CP PIV) Large System processor card was
introduced in CS 1000 Release 4.5. It features the following:
• a PCI-based design that is compatible with current CP PII architecture
• an Intel Pentium processor
• two CompactFlash (CF) sockets (one on-board and one hot-swappable on the faceplate).
The on-board CF is referred to as the Fixed Media Disk (FMD), and the faceplate CF is
referred to as the Removable Media Disk (RMD). See
page 143 and
• 512 MBytes of Double Data Rate (DDR) memory
Physical description
The NT4N39AA card measures 23 cm by 16 cm (9,2 in. by 6.3 in.). See
card (front)
Circuit Card Reference
on page 141
on page 141
on page 144
Figure 26: CP PIV card (side)
on page 143 and
Figure 26: CP PIV card (side)
on page 145
Figure 25: CP PIV card (front)
on page 144.
on page 144.
on
Figure 25: CP PIV
July 2011
141