Composite Clock Output Module Configuration; Rs-422 Output Module Configuration; Composite Clock Output Module Default Settings - Symmetricom SSU-2000 User Manual

Composite Clock Output Module Default Settings

Composite Clock Output Module Default Settings
The Composite Clock Output module maintains factory default and current user
configuration settings. The configuration settings for the Composite Clock Output
Module are provided in
Table E-12. Composite Clock Output Module Configuration
Configuration Setting
Port State
Min Clock
Framing
Zero Suppression
CRC
SSM
PQL
Bypass
Fault Action
Duty Cycle
RS-422 Output Module Default Settings
The factory default setting and range for all RS-422 Output module software
parameters are listed in
Table E-13. RS-422 Output Module Configuration
Configuration Setting
Port State
Min Clock
Framing
Bypass
Fault Action
Duty Cycle
430 SSU-2000 User's Guide
Table E-12.
Factory Default
Disabled
Acquire
Not applicable
Not applicable
Not applicable
Not applicable
4
On
On
5/8
Table E-13.
Factory Default
Disabled
Acquire
Not applicable
On
On
50/50
Range
Disabled/Enabled
Acquire/Lock
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
On/Off
Off/On/Auto
5/8 or 50/50
Range
Disabled/Enabled
Acquire/Lock
Not applicable
On/Off
Off/On/Auto
5/8 or 50/50
12713020-002-2 Revision D – April 2004