Table of Contents
Advertisement
Level 3
Level 4
Remarks
Related
Restrictions BAUD, ECHO, AND EOL are only applicable to EIA-232. The
12713020-002-2 Revision D – April 2004
Use this option to change the setting for a specified
communications port. The setup changes are stored in non-volatile
RAM.
Options are:
MODE {ASCII|TL1}
Sets the current mode to either ASCII (interactive) or
TL1.
Sets the communications port automatic
TIMEOUT
logout-time-out value. Values are in seconds. NEVER
disables automatic logout.
Same as Level 2 operation
Same as Level 3 operation
None
None
communications port must be specified to set any parameter.
Interactive Command Set
SSU-2000 User's Guide 327
Advertisement
Table of Contents
Troubleshooting
