Interactive Command Set
Level 4
Remarks
Related
Restrictions None
358 SSU-2000 User's Guide
SQUELCH {2048|E1-2048}
Turns the output on or off depending on the current PQL
and the threshold. 0 disables the squelch.
When set to On, validates the signal characteristics
ISOLATE
using isolated ones. When set to Off, restores the
isolated condition and returns to normal operation. This
command generates a confirmation request (Yes/No); if
confirmation is No, then no action. For DS1 Output
module.
Same as Level 3 operation
None
SETUP,
STATUS
12713020-002-2 Revision D – April 2004