Table of Contents
Advertisement
IP
Use this command to view current Internet Protocol (IP) address information and
access related values.
Level 0
Level 1
Example:
SSU_2000->ip
The IP Address is 255.25.52.5
The Subnet Mask is 255.255.255.0
The Default Gateway is 0.0.0.0
The Ethernet Address is 00A06E000CCC
Level 2
Level 3
Level 4
Remarks
Related
Restrictions The IP address is in the decimal dotted address format (for
12713020-002-2 Revision D – April 2004
Not applicable
IP
Use this command to display the current IP address, subnet mask,
gateway address, and the Ethernet hardware address.
Same as Level 1 operation
Same as Level 2 operation, with the following additions:
IP {ADDR|MASK|GATE} ip_dotted_address
Options are:
Change the Internet Protocol (IP) address
ADDR
Change the subnet mask
MASK
Change gateway address
GATE
Same as Level 3 operation
When you change a network address, you must restart the
Communications Module in order for the changes to take effect.
None
example: 192.168.70.224). No name server is allowed.
Interactive Command Set
SSU-2000 User's Guide 347
Advertisement
Table of Contents
Troubleshooting
