Symmetricom SSU-2000 User Manual page 291

Table B-5. TL1 Retrieve Commands (Continued)
Command
RTRV-PRMTR-CLK:[tid]:[aid]:
ctag;
12713020-002-2 Revision D – April 2004
Valid aid code: or
ALL S1A1
This command returns the settings for the clock designated
by the aid, or both clocks for ALL.
The format for each response message line is:
^^^"aid:warmup,mintau,maxtau,clkar" <cr lf>
where:
= warmup delay time
warmup
= starting time constant
mintau
= final time constant value in seconds for the
maxtau
clock
= current setting for the clock Auto-Return mode
clkar
[OFF|ON]
TL1 Command Interface
Description
or
S1A12
SSU-2000 User's Guide 291