E1/2048 Khz Output Module Configuration; Khz Output Module Default Settings - Symmetricom SSU-2000 User Manual

2048 kHz Output Module Default Settings

The 2048 kHz Output module maintains factory default and current user
configuration settings. The configuration settings for the 2048 kHz Output Module
are provided in
Table E-10. 2048 kHz Output Module Configuration
Setting
Port State
Min Clock
Framing
Zero Suppression
CRC
SSM
PQL
Bypass
Fault Action
E1/2048 kHz Output Module Default Settings
The factory default setting and range for all E1/2048 kHz Output module software
parameters are listed in
Table E-11. E1/2048 kHz Output Module Configuration
Configuration Setting
Port State
Bypass
Signal Type
Zero suppression
Squelching
12713020-002-2 Revision D – April 2004
Table E-10.
Factory Default
Disabled
Acquire
Not applicable
Not applicable
Not applicable
Not applicable
4
On
On
Table E-11.
Factory Default
Enabled
On
E1
On
0
2048 kHz Output Module Default Settings
Range
Disabled/Enabled
Acquire/Lock
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
On/Off
Off/On/Auto
Range
Disabled/Enabled
On/Off
E1/2048
On/Off
1–16, 0 is disabled
SSU-2000 User's Guide 429