Symmetricom SSU-2000 User Manual page 337

EVENTS
Use this command to read and control current event log information.
Level 0
Level 1
Note: If you specify times and dates, events that occurred after the
starting date and time and before the ending date and time display.
Specified dates have the format yyyy-mm-dd, and specified times
have the format hh:mm:ss.
Specified dates and times are not provided in ISO timestamp format,
and are separated by a space. Start time and stop time default to the
current time of day. Stop date defaults to the current date. Start date
defaults to the current date, minus 24 hours.
12713020-002-2 Revision D – April 2004
Not applicable
EVENTS [ALARM|REPORT] [#events_display|ALL]
EVENTS [ALARM|REPORT] [startdate [starttime]] [stopdate
[stoptime]]
EVENTS [ALARM|REPORT] starttime [stopdate] [stoptime]
If you do not specify any options, only the last event prints.
EVENTS
Options are:
Use this option to show alarm events only. The alarm
ALARM
event is defined as any event ID less than 32.
Use this option to show report events only. Any events
REPORT
excluding alarm events (for example: any event ID is
greater 32).
#event_display
Use this option to show the maximum number of events
to display. Zero returns all events.
Use this option to show all the events stored in the
ALL
buffer.
[startdate] [starttime]
Use this option to specify the start time and date for
displaying events within a time period.
[stopdate] [stoptime]
Use this option to specify the stop time and date for
displaying events within a time period
Use this option to display the event count.
?
Interactive Command Set
SSU-2000 User's Guide 337