Symmetricom SSU-2000 User Manual page 361

PING
Use this command to view network ping (diagnostic) capabilities.
Level 0
Level 1
Level 2
Level 3
Level 4
Remarks
Related
Restrictions None
12713020-002-2 Revision D – April 2004
Not applicable
Not applicable
PING ip_dotted_address
Use this command to determine if the unit is connected to the
network. This command transmits a packet to the specified
address and waits for a response. If a response is received, the
unit displays a successful command completion message. If no
response is received, the unit times-out and prints an unsuccessful
command completion message.
Same as Level 2 operation
Same as Level 2 operation
No name server is available. The Internet Protocol (IP) address is
formatted as a decimal dotted address.
None
Interactive Command Set
SSU-2000 User's Guide 361