Table of Contents
Advertisement
Event Messages
Table A-7. Communications Module Event Messages (Continued)
Event Message
Upgrade ACK, 1A01
Upgrade NAK, 1A01
Hdw Config Err, 1A06
NTP Mode,
Client/Broadcast/BClient/Local
Reset, Clk-B, COML\
InitUserTable, DAVID, COML\
Add User, FRANK, COML\
Mod User, FRANK, COML\
Del User, TESTUSER, COML\
Pql Table, DS1, pql (5)=ST2, COML\
Pql Table Dflt, COML\
Unit Name, AUSTIN, COML\
NTP Peer Add, 192.5.41.40, Client,
COML\
NTP Peer Del, 192.5.41.40, Client,
COML\
NTP Brd Timer, 64 seconds, COML\
SNMP User, ADD, id=1, COML\
SNMP Mode, Ena, COML\
SNMP Manager, Init, 192.5.41.3,
COML\
Evt Blocked, SET, 2A02, COML\
256 SSU-2000 User's Guide
Event #
155
Module's firmware upgrade was completed
156
Module's firmware upgrade was not
completed
157
Call Symmetricom Global Services.
Return to factory.
158
The SSU is configured with NTP running in
a NTP Client, Broadcast, or Broadcast
Client server mode; Local is displayed when
NTP server is initialized. If GPS is not
installed or setup, or NTP has not been
configured NTP remains in Local mode and
uses Comms module time
159
The clock listed was reset by the user
192
Administrator initialized user database
193
Administrator added a user to user
database
194
User/Administrator modified user database
195
Administrator deleted user from user
database
196
PQL database has been modified
197
PQL database has been set to factory
defaults
198
The SSU name has been changed
199
A NTP client was added at the IP address
shown
200
A NTP client was deleted at the IP address
shown
201
The NTP broadcast server timer has been
set to the interval shown
202
A SNMP user has been added in the
position of the user table shown
203
A SNMP Mode has been enabled
204
A SNMP Manager has been initialized at the
IP address shown
205
SNMP events (Traps) will not be generated
from the module shown
Event Description
12713020-002-2 Revision D – April 2004
Advertisement
Table of Contents
Troubleshooting
