Table of Contents
Advertisement
Interactive Command Set
STATUS
Use this command to view the current status of the unit. The status includes a count
of the current active alarms and related information, which provides a quick view of
unit performance.
Level 0
Level 1
Level 2
Level 3
Level 4
Remarks
Related
Restrictions None
372 SSU-2000 User's Guide
Not applicable
STATUS [xAy]
If you do not provide a parameter, all status information from every
module in the unit displays. If a specified address operand is
provided, status detail information for that target module displays.
For each target module, refer to INPUT, CLK, or OUTPUT for a
description.
If the Communications module is specified, the bus connection
profile displays within 900 seconds.
If a Buffer module is specified, nothing displays.
Same as Level 1 operation
Same as Level 1 operation
Same as Level 1 operation
None
CLK, OUTPUT, INPUT,
EVENTS
12713020-002-2 Revision D – April 2004
Advertisement
Table of Contents
Troubleshooting
