Table of Contents
Advertisement
Interactive Command Set
IONAME
Use this command to set an alias name for each input or output port.
Level 0
Level 1
Example:
SSU_2000->ioname
2001-05-24T18:28:23Z ID: SSU2000 Name: SSU_2000
1A05-01 GPS Input
Level 2
Level 3
Level 4
Remarks
Related
Restrictions CLR is an operand, and cannot be used as an I/O port name.
346 SSU-2000 User's Guide
Not applicable
IONAME [xAy]
Use this command to display a previously specified name
associated with each I/O port.
Same as Level 1 operation
Same as Level 2 operation, with the following additions:
IONAME xAy-z[&&z] {CLR|"io_port_name"}
Use this option to set a name associated with each I/O port. No
control characters are allowed. Multiple spaces between words
reduce to one blank character. The port alias can contain up to 20
characters.
Same as Level 3 operation
None
None
12713020-002-2 Revision D – April 2004
Advertisement
Table of Contents
Troubleshooting
