Symmetricom SSU-2000 User Manual page 359

PBO
Use this command to gain access to the phase buildout (PBO) in the input module.
Level 0:
Level 1:
Level 2:
Level 3:
Level 4:
Remarks:
Related:
Restrictions: None
12713020-002-2 Revision D – April 2004
NA
PBO
Display the PBO current mode from each input
Same as Level 2 operation.
PBO [DISABLE|REPORT|EVENT|NONE]
Options are:
PBO disabled
DISABLE
PBO Enabled, the PBO events sent out and displayed,
REPORT
but not stored in the COMM event buffer
PBO Enabled, the PBO events sent out and displayed,
EVENT
but not stored in the COMM event buffer
PBO Enabled, but no PBO events displayed
NONE
Same as level 3 operation
None
INPUT, PHASE
Interactive Command Set
SSU-2000 User's Guide 359